L "MENU" - "ESC" to return to the previous menuīoot, the machine has finished booting, the LCD panel displays "READY", indicating that the machine has entered the print-ready status. L "CANCEL" - "ENT" to confirm or enter the menu. In the menu mode, the function of each button is: Various printer settings are changed via the keys on the panel are finished. The panel DATAMAX DMX-I-4208 printer operator panel. Be careful not to label ribbon across the middle of the detector. The ribbon leads, according to the direction from the printer ribbon roll (RIBBON ROLLER) below spared printheads, roll to ribbon rewind spindle (RIBBON TAKE-UP HUB) on. (2) Install the ribbon roll onto the ribbon axis (RIBBON SUPPLY HUB), the installation should pay attention to the orientation of the carbon layer under the ribbon, to ensure the carbon layer is oriented label paper.ģ. The maximum diameter of the paper roll can be installed 203 mm, installation labels, follow these steps:Ģ Turn the print head lock lever (PRINTHEAD LATCH), thus raising the print head.ģ the label bezel (MEDIA EDGE GUIDE) slide outward, and rotate to a horizontal position.Ĥ sets of the label in the label axis (MEDIA HUB), note paper up, pushed to the innermost, the label from the paper guide lever (MEDIA IDLER) beneath and through the label sensor (MEDIA SENSOR) leads, the pressure in the print head below.ĥ the label to the edges of the label to push the bezel, and rotated to a vertical position.Ħ Slide the label detector to detect holes in the label paper width range.ġ Rotate the print head lock lever (PRINTHEAD LATCH), thus raising the print head. The printer can be installed on an inner diameter of 1.5 or 3-inch label roll, when mounted 1.5 inches (38 mm) from the label roll is the need to 3 inches (76 mm) pull the mounting sleeve.
Note: Please note that in case of power on the printer, plug the printer cable cord prohibited.
(2) the serial / parallel cable, connected to the computer's serial / parallel port, the other end is connected to the printer's serial / parallel printer port.ģ Connect the power cord and turn on the power switch. Addtime： In DATAMAX DMX-I-4208 connectivity and supplies installation as an example:ġ Turn off the printer and the computer's power
0 kommentar(er)
